461065836 发表于 2015-5-11 18:37:45

问几个关于TI-XXXXXXXXXXX的问题

本帖最后由 461065836 于 2015-5-11 19:09 编辑

如题,今天从晴明那里买下了一台没有系统的TI-XXXXXXXXXXX,原先是有系统的,但是后来被晴明误删了。。。。
据晴明说,这台TI-XXXXXXXXXXX在电脑上可以被一些联机软件识别出来,但是却没有合适的系统,我想问问各位大神,有没有TI-XXXXXXXXXXX的系统@549597890 @ZephRay @朔雪X忆

461065836 发表于 2015-5-11 18:41:03

本帖最后由 461065836 于 2015-5-11 22:46 编辑

这是系统没删除之前的图片
This is a photo before delete system

wangjuntao 发表于 2015-5-11 19:09:41

图呢?

wangjuntao 发表于 2015-5-11 19:09:49

图呢?

461065836 发表于 2015-5-11 19:10:21

wangjuntao 发表于 2015-5-11 19:09
图呢?

不是发了吗?

wangjuntao 发表于 2015-5-11 19:11:10

图呢?

wangjuntao 发表于 2015-5-11 19:22:21

461065836 发表于 2015-5-11 19:10
不是发了吗?

不好意思啊,我在学校网速不好,回了这么多,抱歉。

461065836 发表于 2015-5-11 22:04:02

@critor
Hello,Critor!I bought a TI-XXXXXXXXXXX,but it doesn't have the OS. Do you have fit OS system for the
TI-XXXXXXXXXXX?Or do you have the other way to save the TI-XXXXXXXXXXX?
Thank you very much!

461065836 发表于 2015-5-11 22:13:06

本帖最后由 461065836 于 2015-5-11 22:28 编辑

@critor

诗诺比 发表于 2015-5-12 01:00:25

我以前会刷, 参考我以前发过的 NS工程机刷机贴, 国外这种TI-xxx的刷机成功率说是100%

critor 发表于 2015-5-12 03:14:45

Hi,

You should be able to install OS 2.0.0.717 :
https://tiplanet.org/forum/archives_voir.php?id=64653

461065836 发表于 2015-5-12 12:15:36

本帖最后由 461065836 于 2015-5-12 12:18 编辑

critor 发表于 2015-5-12 03:14
Hi,

You should be able to install OS 2.0.0.717 :

Thanks very much!!!{:13_342:}{:13_331:}And can it ndless?

461065836 发表于 2015-5-12 12:16:45

诗诺比 发表于 2015-5-12 01:00
我以前会刷, 参考我以前发过的 NS工程机刷机贴, 国外这种TI-xxx的刷机成功率说是100%

这种TI-XXXXXXXXXX没有CAS,是不是直接安装系统就行了?

critor 发表于 2015-5-13 03:11:36

461065836 发表于 2015-5-12 12:15
Thanks very much!!!And can it ndless?

No Ndless version has been specifically designed for OS 2.0.0.717 to my knowledge.

You can still try Ndless 2.0. Maybe it'll work.

461065836 发表于 2015-5-13 12:55:45

诗诺比 发表于 2015-5-12 01:00
我以前会刷, 参考我以前发过的 NS工程机刷机贴, 国外这种TI-xxx的刷机成功率说是100%

现在TI-XXXXXXXXXXX已经升级到2.0的工程机系统了,还可以降回去吗?
那TI-XXXXXXXXXXX可以利用ndless刷成量产机吗?我找了TI星球,但是没有找到合适的ndless

critor 发表于 2015-5-13 16:39:21

Then, someone has to disassemble OS 2.0.0.717, take Ndless 2.0 sources, and update the syscalls adresses list.

461065836 发表于 2015-5-13 22:08:48

critor 发表于 2015-5-13 16:39
Then, someone has to disassemble OS 2.0.0.717, take Ndless 2.0 sources, and update the syscalls adre ...

Hmm......Thanks. I will try in a few days.

诗诺比 发表于 2015-5-14 11:24:49

461065836 发表于 2015-5-13 12:55
现在TI-XXXXXXXXXXX已经升级到2.0的工程机系统了,还可以降回去吗?
那TI-XXXXXXXXXXX可以利用ndless刷 ...

可以降级, 能刷成量产机, 我已经刷了3台了

critor 发表于 2015-5-14 17:36:31

本帖最后由 critor 于 2015-5-14 17:39 编辑

Modding your prototype into a production model accepting all production OS up to version 3.3 is possible.
Note that versions 3.6 and later do not work properly on your prototype - they just freeze at startup - and it's a problem as they try to prevent you from downgrading once installed.

You need to flash a production Boot1, and a production Boot2.

In order to flash those images, you need to have Ndless.

In order to have Ndless, you need to install a non-CAS prototype OS for which it is available - 1.1.9227 is the only choice to my knowledge : http://tiplanet.org/forum/archives_voir.php?id=2205


If you manage to install that OS, a french tutorial is available :
https://tiplanet.org/forum/archives_voir.php?id=4237

461065836 发表于 2015-5-16 19:05:50

本帖最后由 461065836 于 2015-5-16 19:58 编辑

critor 发表于 2015-5-14 17:36
Modding your prototype into a production model accepting all production OS up to version 3.3 is poss ...
Thanks!!!!!!Now I get TI-XXXXXXXXXXX, can it use DowngradeFix?And how to use?
页: [1] 2
查看完整版本: 问几个关于TI-XXXXXXXXXXX的问题