CX CAS 开机异常 Booting Problem【已解决】
本帖最后由 wangzwhhh 于 2016-1-12 18:44 编辑Hi,
Today, my friend robbed my CX CAS and opened 'nsNandMgr' , which i used to downgrade to OS 3.6, however, when my calculator come back to my hand, it stuck at diagnosis mode. So i pressed reset, and it rebooted to Diagnosis Mode, i know he must 'switch BOOT2 AND DIAG' in the BootD AREA. So in the diagnosis mode, i pressed '0' '1' which is 'Switch to OS Mode' ,and i pressed reset again , it started booting.
Then the booting UI turned into this (showed in picture)
What i had tried are :reinstalled the OS , Clear boot2 and flash boot2 again. These are all useless.
So how to change the LAUNCHINGANIMATION back to it used to be？
Thank you.
@critor 我也见过这个现象。我有个同学的Nspire的开机页面也是这样的，同求原因。 本帖最后由 hikari_calyx 于 2016-1-12 16:41 编辑
我估计是manuf区块被破坏了。这个分区被破坏了之后不好还原的
KARMTI就是因为没有完整的manuf区块所以开机界面也是这个鬼样子
这是我从自己的L版Nspire CX CAS dump出来的manuf区块数据，不确定能否用nsNandMgr刷入其它Nspire CX (CAS)
（注：刷完之后可能会变成CX-C CAS，模拟器测试结果）
hikari_calyx 发表于 2016-1-12 16:26
我估计是manuf区块被破坏了。这个分区被破坏了之后不好还原的
KARMTI就是因为没有完整的manuf区块所以开机 ...
成功了！谢谢。 Manuf blocks haven't been destroyed.
It's just that nsNandMgr has an option to clean Boot graphics.
You just need to download a manuf image including the Boot graphics you'd like to have :
[*] https://tiplanet.org/forum/archives_voir.php?id=19367
https://tiplanet.org/modules/archives/captures/1372238745manuf_cx.png
[*] https://tiplanet.org/forum/archives_voir.php?id=200769
https://tiplanet.org/modules/archives/captures/x1429900028ltcMALo.png.pagespeed.ic.Pt4WBp0RhD.png
Send it to the calculator in the "/ndless/" directory, rename it to "manuf.img" and reflash it in the "4) Manuf area" menu. critor 发表于 2016-1-12 19:28
Manuf blocks haven't been destroyed.
It's just that nsNandMgr has an option to clean Boot graphics. ...
Can i create a boot graphic by myself? {:13_341:} critor 发表于 2016-1-12 19:28
Manuf blocks haven't been destroyed.
It's just that nsNandMgr has an option to clean Boot graphics. ...
BTW, is there any tutorial or instruction of mySpire to create the manuf with my pictures? :P 这个问题让我纠结好久了，终于修好了.... 本帖最后由 critor 于 2016-1-12 23:31 编辑
hikari_calyx 发表于 2016-1-12 22:32
BTW, is there any tutorial or instruction of mySpire to create the manuf with my pictures? :P
You cannot inject your own pictures, unfortunately, because of the data block signature. {:13_339:}
You can just move/resize/distort pictures already present in the TI manuf images data block. critor 发表于 2016-1-12 23:30
You cannot inject your own pictures, unfortunately, because of the data block signature. {:13_339: ...
How to open img? You need to dump the Manuf area using nsNandMgr.
This is going to create a /documents/ndless/manuf.img file.
Just open that file with mySpire.
You'll be able to customize the boot graphics elements options and preview the resulting screen. critor 发表于 2016-1-16 19:15
You need to dump the Manuf area using nsNandMgr.
This is going to create a /documents/ndless/manuf. ...
But, can i add some personal picture resources in to myspire? Again, no.
The Boot1 and Boot2 are never going to accept this, because of the manuf.img data block signature we are unable to calculate properly (2048-bits encrypted... {:13_339:}).
页:
[1]