黑色ti nspire cm-c cas 工程机 dvt1 evt
本帖最后由 guoyening 于 2015-11-22 13:21 编辑我在淘宝上面购买了几个黑色的nspire cm c cas 工程机打孔版 正常的cm是白色的
I have bought some nspire cm c cas dvt1 on Taobao it's black normal nspire cm c cas is white
pcb
sn
系统版本 他可以刷机 被我刷成3.1.0.392了
os versionIt can be flash I flash the3.1.0.392
boot版本
boot version
因为是打孔版 键盘坏了 所以飞线修复
Because it is perforated version of the keyboard is broken so the fly line repair
另一个贴吧网友买的cm c 工程机 上面是白色 下面黑色
pcb
cpu 上面没有海绵
主板上面有飞线
There are some fly lines on the board
这批机器好像除了打孔 并没有什么问题 大部分可以开机 也可以正常刷机
目前只修好一台 和量产机似乎没有区别 除了颜色
因为它很便宜 所以现在淘宝上面已经没有了
相机、手机拍的图片太大不能直接上传,用软件缩放一下,长款都1000以内。最简单的可以用画图。 @ZephRay @critor 楼主方便透露修好几台不?出不出? Very nice find.
Apparently, TI drills the calculators too low.{:13_336:}
It would have destroyed other TI-82/83/84 calculators, but on the TI-Nspire it only destroys the replaceable keypad PCB.{:13_340:}
If you have no keypad PCB replacement, you can use nRemote :
https://tiplanet.org/forum/archives_voir.php?id=6694
It's a computer program which will send keypad events to the calculator via USB. critor 发表于 2015-12-1 22:18
Very nice find.
Apparently, TI drills the calculators too low.
The nspire cm c evt1 has 64m ram and 128m rom
页:
[1]