cnCalc计算器论坛

 找回密码
 注册
搜索
查看: 6536|回复: 22

[83/84] 收到一台 TI-83 Premium CE 工程样机(DVT)

[复制链接]
发表于 2017-6-7 13:38:29 | 显示全部楼层 |阅读模式
如题。在某网站收了一台  TI-83 Premium CE 图形计算器,结果收到后发现是工程样机(背后有“DVT”字样),OS版本 5.0.0.0187,经测试连接到电脑端 TI Connect CE 也无法给这台计算器升级系统。所以来论坛咨询一下大家,工程样机有没有研究价值,硬件会不会有什么 Bug,不能升级系统会不会影响以后的使用。如果不适合日常使用的话,打算就去退货了。

下面上传一些我收的这台 TI-83 Premium CE 工程样机的照片。
DSC_1061.JPG

DSC_1062.JPG

DSC_1063.JPG

DSC_1064.JPG

DSC_1065.JPG

DSC_1066.JPG

DSC_1067.JPG

DSC_1068.JPG

捕获1.JPG

捕获2.JPG

捕获3.JPG

 楼主| 发表于 2017-6-7 15:07:23 来自手机 | 显示全部楼层
本帖最后由 stj2002 于 2017-6-7 15:09 编辑
電卓院亜紀良 发表于 2017-6-7 14:58
看到这台工程机挂了至少估计有一年了,结果还真有人翻车了(雾
影响使用我觉得还是有一定可能性的,83/84C ...


谢谢回复。卖家原图拍的很不清晰,收到后才发现背面DVT字样。没想到这么小众的机型还有工程样机流通到国内来。不能升级系统就没有折腾价值了。法文键盘倒影响不大,就几个单词不一样,熟悉了跟英文一样用。
发表于 2017-6-7 15:12:21 | 显示全部楼层
Hi.

Very interesting.
You could check the Boot Code version, since it's dealing with the update -> MODE ALPHA S

Also, could you start by dumping this strange OS ?
You can use the CEmu built-in dumping how-to and associated program : https://oss.jfrog.org/artifactor ... lberthdev/cemu/git/
Or you can use TiLP-II 1.18, more complex to set up, but will provide a more complete dump : http://www.ticalc.org/archives/files/fileinfo/374/37480.html

Thanks.
 楼主| 发表于 2017-6-7 15:24:30 来自手机 | 显示全部楼层
critor 发表于 2017-6-7 15:12
Hi.

Very interesting.

Thank you very much.  I will try it.
发表于 2017-6-7 15:37:23 | 显示全部楼层
Fixed TiLP-II 1.18 link for Windows :
http://www.ticalc.org/archives/files/fileinfo/374/37481.html

But CEmu should be much more easy.
It just doesn't dump the apps+archive pages, but you can still get the apps and archived vars through TI-Connect CE.
发表于 2017-6-8 00:41:25 | 显示全部楼层
本帖最后由 critor 于 2017-6-8 00:52 编辑

To clarify the problem.

There are 2 generations of TI-83 Premium CE prototypes :
- K-DVT (2013)
- K-ELG2-DVT (2014)

And I know there are major hardware differences between them.
For example, OS versions 5.0.0.0058, 5.0.0.0059 and 5.0.0.0062 are working on 2013 prototypes, but failing (white screen reboot-loop) on 2014 prototypes and 2015 production models.

Although the error message is not very accurate, TI-Connect CE might be just trying to prevent you from installing an OS version incompatible with your 2013 hardware.
 楼主| 发表于 2017-6-8 01:42:12 | 显示全部楼层
本帖最后由 stj2002 于 2017-6-8 01:46 编辑
critor 发表于 2017-6-7 15:12
Hi.

Very interesting.

Boot Code: QQ图片20170608011513.jpg

I tried send some TI-84 Plus CE Apps to the TI-83 Premium CE Calculator, but it does not seem compatible with ".8ek" files.
QQ截图20170608004539.png

QQ截图20170608010248.png

QQ截图20170608010303.png

And I tried to dump the OS, but I failed. I think maybe I have any mistakes in the operation. Please tell me if I have any mistakes.

CEmu:
I save the program as "ROMDumper.8xp" and send it to the calculator, then run it from the homescreen by pressing [2nd][0], and selecting the "Asm(" token, then select "DUMP" from the program menu. Unfortunately I get an error message on the calculator's display.
QQ截图20170608012312.png

QQ截图20170608004237.png

QQ图片20170608010044.jpg     QQ图片20170608010012.jpg


TiLP II 1.18:
I just don't know how to use this program. So I can't dump the OS with it.  Maybe I got a incompatible version of GTK+ but TiLP need a correct one?
QQ截图20170608011042.png




发表于 2017-6-8 03:52:07 | 显示全部楼层
Thank you very much for your attempt.

We're trying to investigate this, and then we'll get back to you, for both the dumping and the upgrade.
 楼主| 发表于 2017-6-8 17:13:19 | 显示全部楼层
critor 发表于 2017-6-8 03:52
Thank you very much for your attempt.

We're trying to investigate this, and then we'll get back t ...

Bad news: I tried upgrading to the TI-84 Plus CE OS 5.2 (use the OS file "TI-84_Plus_CE_5.2.2.0043.8eu") with TI Connect CE, and then the TI-83 Premium CE calculator turned into a brick. Is there any way to get it back to normal? Please help. Thank you very much.

0CD8695E7839F91DD75D9A01E85E0D38.jpg

E2680FE7B389E39B96BA5AC856472F87.jpg

FDD19D3F39A3962988E25C64B03DD8D8.jpg
发表于 2017-6-8 17:27:37 | 显示全部楼层
Not really bricked.
But that's why I warned you about the 2 DVT prototypes generations incompatibilities, and why it would have been wise to complete the dumping first.

So what do you get ?
A calculator stuck on a white screen whatever you do ?

You can force the Boot Code OS update screen by performing a reset while holding 2 keys : [2nde] [suppr]

But of course, you'll have to send a compatible OS, and seeing how your DVT-EVT2 prototype is much older than our DVT-EVT3 which already had compatibility problems...

Try to send the oldest available TI-83PCE production OS : 5.0.0.0089 (which is still more recent than your 5.0.0.0187EVT2)
https://tiplanet.org/forum/archives_voir.php?id=171798

I hope the EVT2 support hadn't been already dropped at that time.
 楼主| 发表于 2017-6-8 18:07:10 | 显示全部楼层
本帖最后由 stj2002 于 2017-6-8 18:14 编辑
critor 发表于 2017-6-8 17:27
Not really bricked.
But that's why I warned you about the 2 DVT prototypes generations incompatibil ...

I've read your posts and seen your warning, but I thought that TI Connect CE would prevent the OS update of different models, then I found I was wrong. The TI-83 Premium CE calculator just received the TI-84 Plus CE OS file which TI Connect CE sent to it, and perform the update, then it stuck on a white screen whatever I do.
I tried your suggest by performing a reset while holding 2 keys : [2nde] [suppr], but nothing happened with it. The calculator still stuck on a white screen. TI Connect CE cannot find the calculator, so I cannot send a compatible OS which your tell me to download. Is there anything wrong with my operation?


Thanks.

发表于 2017-6-8 18:48:13 | 显示全部楼层
Maybe the combo was different on DVT-EVT2.

Also, on 2014 DVT prototypes and production models, there is a protection blocking 84+CE OSes on 83PCE hardware, and 83PCE OSes on 84+CE hardware.
So if you really tried to put a 84+CE OS on your 83PCE DVT-EVT2 2013 prototype, getting strange things may be normal.


Let's detail the process step by step :
- press and hold the reset button
- without releasing the reset button, press and hold the [2nde] and [suppr] keys
- without releasing the 2 keys, release the reset button
- if the calculator doesn't automatically turn back on, without releasing the 2 keys, type [on]

This should trigger the Boot Code OS update screen.

If it doesn't work, try a slightly different combo :
- press and hold the reset button
- without releasing the reset button, press and hold the [suppr] key
- without releasing the key, release the reset button
- if the calculator doesn't automatically turn back on, without releasing the key, type [on]
 楼主| 发表于 2017-6-8 20:03:29 | 显示全部楼层
本帖最后由 stj2002 于 2017-6-8 20:04 编辑
critor 发表于 2017-6-8 18:48
Maybe the combo was different on DVT-EVT2.

Also, on 2014 DVT prototypes and production models, th ...

Thank you for your reply.

I tried the two methods, then I found that the second method (reset and press & hold the [suppr] key) is work.
Then I use TI Connect CE to send the OS file "ti83pce_5.0.0.0089.8pu" to the calculator, then it works. But when the OS installing is complete, the calculator is still stuck on a white screen whatever I do. I reset the calculator again, but it is still not come back to normal.

Can I try it for another OS file if there is one compatible?

1.jpg
QQ截图20170608194351.png     QQ截图20170608194413.png

2.jpg    3.jpg

发表于 2017-6-8 20:40:23 | 显示全部楼层
Ok, great - it's getting better. :)

Apparently, the [suppr] boot combo was changed to [2nde]+[suppr] later.

I'm sending you a private message.
 楼主| 发表于 2017-6-10 01:28:08 | 显示全部楼层
本帖最后由 stj2002 于 2017-6-10 01:55 编辑

Thanks for everyone above, especially @critor.

I am very sorry to make we lose a rare opportunity to dump the strange OS 5.0.0.0187. It's all my fault to make this rare TI-83PCE DVT-EVT2 2013 prototype into a brick. Now it cannot power on anymore, just display black screen.  If I had been waiting for compatible dumping tools and didn't try to update the OS before dumping the OS file, it wouldn't have been this result.  

In this case, at first I tried send the “TI-83_Premium_CE_5.2.1.0042.8pu” OS file, and "TI-83_Premium_CE_5.1.1.0112.8pu" OS file to the TI-83PCE DVT-EVT2 2013 prototype, through TI Connect CE software. All of them are incompatible. TI Connect CE software prevented the incompatible upgrade. Then I tried send the “TI-84_Plus_CE_5.2.2.0043.8eu” OS file through TI Connect CE software, but this time TI Connect CE software didn't prevent the OS upgrade, then I make the calculator into a half-brick stuck on a white screen whatever I do. All the OS file I used are come from TI's offical website.
Then I tried to unbrick the calculator. But I cannot find a compatible OS for this calculator. I should have dumped the OS file before, but I didn't. In the end, I executed a dangerous operation, which make it completely into a brick and cannot power on anymore. Now it cannot be recognized by Windows PC and TI Connect CE anymore, it just shown as an Unknown Device in Device Manager.


I just do not understand that: why TI Connect CE software block the upgrade of the OS file of TI-83PCE production models, but without preventing upgrade of the OS file of different TI-84 Plus CE production models.


In any case, I have made a lot of attempts and learned a lot. Fortunately, before the calculator turns brick, I have taken some photos of its screen display informations. And I got all the apps & archived vars from this TI-83PCE prototype via TI Connect CE software. I found that the ".8ek" file which get from this prototype is compatible to it, and TI Connect CE can send it back to the calculator. But the ".8ek" file which from TI's offical website and other forums is incompatible to it, and TI Connect CE cannot send it to the calculator. If these files are useful, anyone can get them from me (use private message please).


QQ截图20170610011348.png

Soon after, I will upload some photos about the disassemble of this TI-83PCE prototype, you can see the PCB and main chips on it.

That's all I can share here. Hope to be useful to others.

 楼主| 发表于 2017-6-10 22:32:25 | 显示全部楼层
本帖最后由 stj2002 于 2017-6-10 23:01 编辑

The photos about the appearance and disassemble of my TI-83 Premium CE prototype, before it turns brick:  

DSC_1126.JPG   
DSC_1125.JPG


DSC_1117.JPG     DSC_1118.JPG

DSC_1119.JPG

DSC_1120.JPG

DSC_1121.JPG

DSC_1122.JPG

DSC_1123.JPG     DSC_1124.JPG   


DSC_1127.JPG

DSC_1107.JPG

DSC_1105.JPG

DSC_1106.JPG

DSC_1108.JPG

DSC_1109.JPG

DSC_1110.JPG

DSC_1111.JPG

DSC_1112.JPG

DSC_1113.JPG

DSC_1114.JPG

DSC_1115.JPG   

DSC_1116.JPG

Anyone can use these photos freely. Hope to be useful to the investigation.      
By the way: If anyone has any idea about how to unbrick this calculator, please reply to this post. Thanks!
---------------------------------------------

欢迎广大吃瓜群众前来围观。  
Thank you for visiting this post.  

发表于 2017-8-4 09:24:46 | 显示全部楼层
和TI-84 CE有什么区别?是不是就是键盘上印的字是法文?
 楼主| 发表于 2017-8-4 13:54:10 | 显示全部楼层
本帖最后由 stj2002 于 2017-8-4 14:00 编辑
think21st 发表于 2017-8-4 09:24
和TI-84 CE有什么区别?是不是就是键盘上印的字是法文?

不仅如此。

TI-83 Premium CE 与 TI-84 Plus CE 相比,具有以下不同点:

1.TI-83 Premium CE 仅在法国销售,而非在全球地区均有销售。
2.TI-83 Premium CE 采用法语的按键标记和法语用户界面(可切换至其他语言)。其键盘布局取消了 SIN、COS 和 TAN 键,取而代之的是像 TI-Nspire CX 那样的一个 trig 键——它可以打开一个用于输入三角函数的菜单。
3.值得一提的是,TI-83 Premium CE 从型号上来看比 TI-84 Plus 要低级,然而功能比同级别的 TI-84 Plus CE 还要强——TI-84 Plus CE 无法在运算结果中保留根式,而 TI-83 Premium CE 可以做到。  

以上资料引用自“计算器百科”网站:https://calcwiki.org/TI-83%E7%B3%BB%E5%88%97

补充:我收的这台 TI-83 Premium CE 原型机(工程样机)具有考试模式指示灯(Exam Mode LED)。而普通的 TI-84 Plus CE 是没有的。



发表于 2017-8-4 15:11:24 | 显示全部楼层
本帖最后由 think21st 于 2017-8-4 17:05 编辑
stj2002 发表于 2017-8-4 13:54
不仅如此。

TI-83 Premium CE 与 TI-84 Plus CE 相比,具有以下不同点:
查了一下没有英文语言可选
 楼主| 发表于 2017-8-4 18:15:13 | 显示全部楼层
本帖最后由 stj2002 于 2017-8-4 18:22 编辑
think21st 发表于 2017-8-4 15:11
查了一下没有英文语言可选

有的。看17楼那些 TI-83 Premium CE 的照片,屏幕显示的都是英文界面。MODE 设置里语言栏中就有 English 可选。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

联系站长|Archiver|手机版|cnCalc计算器论坛

GMT+8, 2020-9-28 07:57 , Processed in 0.043459 second(s), 21 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表