549597890 发表于 2013-11-9 17:24:38

nspire non-cas用nlaunch安装3.6后卡在启动的麻点屏幕，中间的转圈根本不动后死机

nspire non-cas用nlaunch安装切换包的3.6后卡在启动的麻点屏幕，中间的转圈根本不动后死机

然后就是发现系统最低限制限定在3.6了，装删除boot2 的3.2也会提示系统太低....
那么只能用nlaunch启动更低系统了？也就是我这台其实是披着量产外衣的工程机？
啊啊啊啊

@六合江山QQ

六合江山QQ 发表于 2013-11-9 17:37:30

本帖最后由 六合江山QQ 于 2013-11-9 17:39 编辑

use nlaunch toggle to 3.1，拿nsNandMgr remove limitation。
If you cannot do that，@critor

549597890 发表于 2013-11-9 17:58:49

ok,got it !

549597890 发表于 2013-11-9 17:59:11

六合江山QQ 发表于 2013-11-9 17:37 static/image/common/back.gif
use nlaunch toggle to 3.1，拿nsNandMgr remove limitation。
If you cannot do that，@critor

i'll try this

critor 发表于 2013-11-9 19:43:04

Yes, OS 3.6 even used with Nlaunch still sets the minimal installable OS version to 3.6.

Reinstall Nlaunch to launch OS 3.1.
You can then use nsNandMgr to remove the minimal installable OS version.

critor 发表于 2013-11-9 19:51:17

Yes, OS 3.6 even used with Nlaunch still sets the minimal installable OS version to 3.6.

Reinstall Nlaunch to launch OS 3.1.
You can then use nsNandMgr to remove the minimal installable OS version.

549597890 发表于 2013-11-9 20:13:52

critor 发表于 2013-11-9 19:43 static/image/common/back.gif
Yes, OS 3.6 even used with Nlaunch still sets the minimal installable OS version to 3.6.

Reinstal ...

ok.thank you!
页: [1]
查看完整版本: nspire non-cas用nlaunch安装3.6后卡在启动的麻点屏幕，中间的转圈根本不动后死机