Ndless 3.1 beta已发布！
下载地址：http://ndlessly.wordpress.com/ndless/安装教程：http://ndlessly.wordpress.com/ndless-user-guide/
这里也能下载到：http://adriweb.free.fr/ndless/以后能否及时更新我不知道。这里有支持cx的模拟器等软件。
祝各位玩的开心
教程附上：
安装需求
一台TI-Nspire CAS或者非CAS，CP版TP版或者CX皆可
计算器已安装OS V3.1.0
任何的联机软件如TI-Nspire Student Software
安装和升级
从Ndless V2.0升级：
将计算器升级到3.1版系统并遵循以下安装步骤
使用计算机安装
在计算器上创建名为“ndless”（不含引号）的文件夹，将calcbin文件夹内名为ndless_resources.tns的文件发送进去（ndless文件夹）。此时应立即确认计算器上的接收提示（重要）
接下来在calcbin文件夹中寻找对应的文件，格式为ndless_installer-系统版本.tno|tnc|tco|tcc（对应非CAS、CAS、CX 非CAS、CX CAS）。
将该文件发送到计算器，计算器上将显示成功安装的对话框。联机软件会显示错误消息，如果要继续使用联机软件可能需要把它关掉重开。
如果你之前忘了确认ndless_resoures.tns的接收消息而无法关掉ndless的对话框，关闭电源即可让其消失。
搞定！安装后重启也是不会消失的。安装ndless后请不要删除ndless/ndless_resources.tns
关于新版的若干说明：之前支持ndless2的程序在黑白机上还是能用的，cx机型的程序需要做些许改动并重新编译。 终于出来了啊 打不开。。。要跳墙？ 网页打不开，能不能贴出来啊 移动2g不用狗急跳墙，现在贴出来好了 我联通就不行。。。好奇怪。。去年假期连维基百科都上不了 这玩儿有谁尝试了？？
另外如果不想用了怎么卸载掉啊？ 话说怎么装啊？？？？？？、 安装方法：
在计算器中新建一个名为ndless的文件夹，将ndless_resources.tns传入该文件夹。再根据NSpire的型号把ndless_installer-3.1.0.tcc/tco/tnc文件作为OS传入。传入后系统会有弹出窗口提示，请【立即】按确认，否则可能导致安装失败。然后就可以啦~
卸载方法：
计算器中打开ndless_resources.tns会提示你是否卸载。 打不开，求如何狗急跳墙，各位大侠帮帮我啊，谢谢了！！！！！！！ 本帖最后由 零下一度 于 2012-1-20 14:52 编辑
9# 朔雪X忆
这是什么情况？？怎么办
确定是灰色的，按enter无用啊 果然需要代理
开SSH试试能否给大家搬回来 本帖最后由 零下一度 于 2012-1-20 14:58 编辑
谁安了？安装成功啥样儿？ 我安完了除了软件查计算器里的东西，不能传文件外，没发现啥变化啊 安装完成……话说能兼容以前的程序吗？ 这个是完美和谐还是随用随刷？ What is Ndless for TI-Nspire?
Ndless combines an executable loader and utilities to open the TI-Nspire to third-party C and assembly development.
As a TI-Nspire user, installing Ndless on your calculator will enhance the Operating System with the functions required to run assembly programs.
Requirements
A TI-Nspire CAS or non-CAS Clickpad, Touchpad or CX
OS v3.1.0 installed on it
Any linking program such as TI-Nspire Student Software
Installation and upgrade
Upgrading from Ndless v2.0
Upgrade your OS to v3.1 and follow the installation procedure.
Installing from a computer
Create a directory called ‘ndless‘ on the calculator. Send the file ‘ndless_resources.tns‘ from the ‘calcbin/‘ directory of Ndless to this new directory. Dismiss on the TI-Nspire the popup for the file reception(this is important).
Then locate the file ‘ndless_installer-.tno|tnc|tco|tcc‘ in the ‘calcbin/‘ directory of Ndless where matches the OS version currently installed on the calculator.
Send this file as an OS upgrade to the calculator. The calculator will display a popup about the success of the installation. The linking software will display an error message on the computer side. You may have to close and reopen it to use it again.
If you have forgotten to dismiss the ndless_resoures.tns reception popup and can’t dismiss Ndless’s popup, just turn off and on the TI-Nspire to make it disappear.
That’s it! The installation is reboot-proof. Do not delete ‘ndless/ndless_resources.tns‘ as long as Ndless is installed.
Upgrading from a computer
Follow the installation procedure. The calculator needs to reboot.
Calc-to-calc installation from another Ndless-ed device
This feature may be broken on classic TI-Nspire. Please report any problem.
Create a directory called ‘ndless‘ on the calculator. Send the file ‘ndless_resources.tns’ from the ‘ndless‘ directory of the Ndless-ed calculator to the other one. Then send the OS from the Ndless-ed calculator to the one. Ndless is directly available on the next reboot.
Calc-to-calc upgrade
Transfer the new ‘ndless_resources.tns’ from the ‘ndless/‘ directory of the Ndless-ed calulator to the other one. Then reset the calculator.
Installing on the nspire_emu emulator
Create a folder named ‘ndless‘. Set the target to ‘ndless‘ (menu Link->Set target folder…). Send ‘ndless_resources.tns‘ as a document, and ‘ndless_installer-.tno|tnc|tco|tcc‘ as an OS.
Running native programs
Native programs have the same ‘.tns‘ extension as standard documents. Transfer the executable with a linking program to any folder of the TI-Nspire. Then run the executable from the Documents screen of the TI-Nspire.
You may try the particles demo available in the calcbin/samples/ directory.
Programs built for Ndless v2.x should work as is on classic TI-Nspire. Programs must be rebuilt and slightly adapted to run on TI-Nspire CX. If a program is not yet available for CX, ask his author.
Uninstallation
Open ‘ndless_resources.tns‘ from the Documents screen. A reboot will be initiated.
Troubleshooting
If the TI-Nspire becomes unusable, hangs or loops at reboot time:
Reboot the TI-Nspire, by unplugging the USB cable, then removing and putting back a battery.
Enter the maintenance menu by turning it on while holding the following keys until half the progress bar:
with the ClickPad keypad: Home+Enter+P then ON
with the TouchPad keypad or the CX: Doc+Enter+EE then ON
Select ’2′ to uninstall the current OS. Reinstall it when asked to.
If running an executable from the documents screen displays the following message: “Sorry. Could not open document ‘xxx.tns’”:
Ndless has not been correctly installed. Try to reinstall it.
Known issues and limitations
Ndless v1.x/v2.x programs which use the show_msgbox() function must be rebuilt to be compatible.
A more complete list of known isues can be found in the tracker: http://www.unsads.com/projects/nsptools
Support and suggestions
Forum
Issues and enhancements tracker
TI-Nspire hacking wiki
Development version of the source code (guest/guest)
Problem report
First make sure that:
You are using the right ‘ndless_installer-.tno|tnc|tco|tcc‘ file compatible with the Operating System (OS) version currently installed on your calculator
You have followed the steps in the troubleshooting section above
You don’t find a solution on the web sites above
E-mail anything which may help the author to fix the issue, or fill in a new ticket on http://www.unsads.com/projects/nsptools
Many thanks to
calc84maniac (HW info), Goplat (TI-Nspire emulator, HW info), hwti (OS info, v1.0 64-bit support), squalyl (Hackspire and development tools hosting), tiplanet.org (data hosting).
Thanks to all the contributors and beta testers, including Adriweb, apcalc, BrandonW, bsl, bwang, calc84maniac, calcforth, chronomex, critor, Levak, Lionel Debroux, shrear.
Development team
Olivier Armand aka ExtendeD – < [email protected] >
Former team member: Geoffrey Anneheim aka geogeo – < geoffrey dot anneheim at free dot fr >
Ndless is brought to you by Omnimaga: The Coders Of Tomorrow www.omnimaga.org
Legal stuff
Most of the work is covered by the Mozilla Public License, version 1.1 (MPL). Please read careful the file “Mozilla-Public-License-v1.1.html” before distributing of any part of Ndless, with or without modification.
Some parts are covered by other licenses. Others are in the public domain. These parts are identified by the files LICENSE.txt or LICENSE.html in the sub-directory.
Changelog
See Changes.txt in Ndless folder. 那个我记得我贴出来了…… 9# 朔雪X忆
9254
这是什么情况？？怎么办
确定是灰色的，按enter无用啊
零下一度 发表于 2012-1-20 14:45 http://www.cncalc.org/images/common/back.gif
我的也是。。。坑爹啊。。
我的也是。。。坑爹啊。。
imath 发表于 2012-1-20 16:51 http://www.cncalc.org/images/common/back.gif
可以用触摸板点确定
但是用enter不行