不锈钢 发表于 2010-2-8 20:18:40

TO imath

吃卡西欧王国上发帖提问的人是我。你看得懂2l的回复吗?

hcz 发表于 2010-2-8 20:20:17

Google翻译。。。搞定

不锈钢 发表于 2010-2-8 20:46:45

太蹩脚了

不锈钢 发表于 2010-2-8 20:50:41

Isn't it "F2"?
"F2" "Ln(" "OPTN" "," "→“ and "↓" correspond to bit 7 of the MPU-port B (on the slim). Maybe bit 7 of port B is broken or there is a weak solder joint. If guarantee has run out, you could disassemble the calc and have a look. It is not very likely, but perhaps you are lucky and the reason is only some dirt or corrosion on the PCB.

钢de噢叶 发表于 2010-2-8 20:56:35

你问的是什么问题

钢de噢叶 发表于 2010-2-8 21:00:15

"F2" "Ln(" "OPTN" "," "→“ and "↓" correspond to bit 7 of the MPU-port B (on the slim). Maybe bit 7 of port B is broken or there is a weak solder joint.
"F2" "Ln(" "OPTN" "," "→“ 和 "↓" 都和bit 7 of the MPU-port B类似。可能bit 7 of the MPU-port B坏了或者焊接点松动?

钢de噢叶 发表于 2010-2-8 21:01:54

If guarantee has run out, you could disassemble the calc and have a look.
如果保修已经过期(外国人保修意识真强烈),你可以拆开计算器看一看

钢de噢叶 发表于 2010-2-8 21:03:41

It is not very likely, but perhaps you are lucky and the reason is only some dirt or corrosion on the PCB.
虽然不是很可信,但是有可能你很幸运因为那只是一些PCB上的灰尘或者PCB被侵蚀

[Boeing 617] 发表于 2010-2-8 21:04:49

谷歌翻译那不是乱来吗,啊?

钢de噢叶 发表于 2010-2-8 21:05:03

不了解什么是。。。bit 7 of the MPU-port B

[Boeing 617] 发表于 2010-2-8 21:05:56

MPU是什么

钢de噢叶 发表于 2010-2-8 21:06:59

是不是像电脑键盘一样,那些按键是在一条线路上的?

不锈钢 发表于 2010-2-8 21:24:41

7位的MPU

imath 发表于 2010-2-8 22:34:30

我当然知道了,顺便还打了我们论坛的广告

Ulysses 发表于 2010-2-9 10:04:57

打广告没用,它们的电脑显示不了中文。
还有提醒你们一句:我们也要增强自主创新意识,SLIM SD等研究计划如果要外传首先要在论坛进行组织探讨!

疯不狂 发表于 2010-2-9 10:11:00

打广告没用,它们的电脑显示不了中文。
还有提醒你们一句:我们也要增强自主创新意识,SLIM SD等研究计划如果要外传首先要在论坛进行组织探讨!
Ulysses 发表于 2010-2-9 10:04 http://www.cncalc.org/images/common/back.gif
本人论坛计划有…………第6章

疯不狂 发表于 2010-2-9 10:12:00

打广告没用,它们的电脑显示不了中文。
还有提醒你们一句:我们也要增强自主创新意识,SLIM SD等研究计划如果要外传首先要在论坛进行组织探讨!
Ulysses 发表于 2010-2-9 10:04 http://www.cncalc.org/images/common/back.gif
现在不一定,可能有的人电脑有NET2.0,全面支持86国语言

imath 发表于 2010-2-12 18:28:04


本人论坛计划有…………第6章
疯不狂 发表于 2010-2-9 10:11 http://www.cncalc.org/images/common/back.gif
你的论坛计划怎讲?
页: [1]
查看完整版本: TO imath