【ns新发现】安装sd卡的可能
今天进自检时偶然发现的 不过具体怎么用呢这都让你发现了 本帖最后由 critor 于 2014-4-26 05:17 编辑
Yes, the diagnostic software is mentionning SD/MMC memory cards in various strings.
And oldest TI-Nspire ClickPad 1.x diagnostic versions even have some code to deal with them.
But of course, there is no SD/MMC reader in the TI-Nspire.
It *might*, and note I insist on the 'might', be possible to connect one through the J04/Dock connector.
Or it might just be some old code TI hasn't removed, code which was used when the TI-Nspire handhelds were still development boards.
Have a look at this early 2007 TI-Nspire ClickPad development board.
You'll be able to spot a SD/MMC reader. ;)
http://tiplanet.org/forum/gallery/image.php?album_id=1&image_id=2 critor 发表于 2014-4-26 05:15 static/image/common/back.gif
Yes, the diagnostic software is mentionning SD/MMC memory cards in various strings.
And oldest TI-N ...
Amazing!Can it work on the development boards? 感觉没有必要。。现在把128m装满。打开我的文档要等十多秒。。。再弄个卡。。。 According to code and strings present in the oldest 1.1.xxxx diagnostic softwares, the SD/MMC reader was working and could be used to reflash the NOR chip (Boot1) and NAND chip.
The newer TI-Nspire CX diagnostic software still looks for an SD card when you trigger the "test image" test for example:
怎么进自检? The Diagnostic software is triggered by holding the following keys while resetting the calculator:
[*]TouchPad keypad: http://tiplanet.org/forum/images/smilies/nspire/ns_me.pnghttp://tiplanet.org/forum/images/smilies/nspire/ns_mo.png
[*]ClickPad keypad: http://tiplanet.org/forum/images/smilies/nspire/ns_me.pnghttp://tiplanet.org/forum/images/smilies/nspire/nsg.png
页:
[1]